[China Glass Net] The advantage of glass wine bottle is that it has a certain mechanical strength, so that it can withstand the pressure inside the bottle and the external force during transportation, in order to ensure that the glass bottle does not collide or break during transportation. We should take the tray packaging measures for the glass bottles. So, how to pack the glass bottles in the tray? 1, tray quality: material selection, can use pine wood does not make poplar; also use poplar, try to choose the thickness of the board is more than 15mm, the tray's 8 legs as far as possible on the side length of 10cm or more; more important It is 8 legs, just like the old man. As the saying goes, "The old legs are weak first," the tray is the same. If the legs of the tray are 7 to 8 cm long, it is not suitable for a small glass bottle. 2, tray paper: tray paper is better kraft paper, if there is no kraft paper, it should also be a reinforced type, after the four corners of the tray paper are stitched into a paper box, use both hands to end the paper box, it feels quite If the end is deformed immediately or not at all, then the tray paper material is too bad, so it is better not to use it. 3, belt support: try to choose the packaging material produced by the new material, avoid the use of recycled materials, because the tensile strength of the recycled material is very low, it is easy to break when the tray is hard to brake, even if it is continuous, subsequent transfer or loading and unloading in the tray In the process, the risk of breakage is very large; the difference between the new material and the old material--the color of the new material is bright and bright, the workmanship is smooth, there is no raw edge, the whole dish smells no pungent smell, and the reverse is the recycled material. As far as possible, when playing the tray, try to wear 3 straps on a wide side of 1.2 meters. When playing the high bracket, try to make the waist belt brakes safer. 4, wrapping film: in the glass wine bottle factory if the tray is a bit sloppy before loading, the quicker solution is to quickly use the wrapping film to wrap a few more, and it is better to machine the film; so wrapped and pulled down thousands of miles In addition, when unloading the car is still intact, this is the merit of the wrapping film; so using the tray packaging, it is better to wrap a few more is the truth, it is better to be a professional machine wrap! Because the machine is powerful and evenly continuous. 5, the top of the tray cover: the role is to prevent rain from entering and short-term sun exposure; once the water enters the tray, the tray paper is wet, then the entire tray is used for tripping danger; so the top of the cover must be used, and try to use thick Point 6, the height of the tray: some glass wine bottles on the big and small or the middle of the big two small, this will cause too much space between the bottles to flash, the care is not neat, playing the high support is easy to smash, once the care is given Transportation and loading and unloading vehicles bring a lot of trouble, so such glass bottle products can only be used for low-profile, and the height is preferably below 1.3 meters.
Woven fabric is a loom in the form of throwing, the yarn is formed by the interlacing of warp and weft, and its organization generally has three categories: plain weave, twill and satin and their changes. This kind of fabric is firm, straight, and not easily deformed due to the weft and weft interlacing.
Cotton Fabric,Woven Fabric,Woven Textiles,Woven Cotton Fabric SHAOXING SHUKE IMPORT AND EXPORT CO.,LTD , https://www.shuketex.com