[China Glass Net] I. Insulating glass butyl rubber has the factors of wire drawing carbonization: 1. The temperature of the rubber box is too high, some equipments have been used for a long time, temperature control failure occurs, the actual temperature is lower than the display temperature, or the temperature is much higher. Only when it plays a controlling role, causing gelatinous damage, resulting in drawing phenomenon, carbonization will occur for a long time, resulting in equipment blockage and gelatinous damage; 2. Carbonization of the rubber layer on the surface of the butyl gelatinized rubber tank; 3. Hollow glass The thermal stability of the base rubber itself is not good; 4, the butyl rubber is repeatedly heated in the plastic box for a long time; 5, there are two different kinds of hollow glass hot melt glue in the plastic box. Second, to solve the hollow glass butyl rubber wire drawing method: 1, the temperature of the glue is set according to the specified technical parameters; 2, when there are abnormal phenomena such as carbonization, check the difference between temperature control and actual temperature; 3, the plastic box The lid is closed at any time to avoid contact with the high temperature butyl rubber on the surface and to accelerate the oxidation. The hollow glass butyl rubber which has been repeatedly heated for a long time is better cleaned and replaced with new rubber. 4. Do not use two different kinds of insulating glass. Butyl rubber. Fleece Fabric,Polyester Fleece Fabric,Polar Fleece Fabric,Custom Fleece Fabric Jiangyin Yaze Wool Textile Co. LTD , https://www.ya-ze.com